Efficiency optimization of a direct torque controlled induction motor used in hybrid electric vehicles

 
Το τεκμήριο παρέχεται από τον φορέα :

Αποθετήριο :
Ιδρυματικό Αποθετήριο Πολυτεχνείου Κρήτης
δείτε την πρωτότυπη σελίδα τεκμηρίου
στον ιστότοπο του αποθετηρίου του φορέα για περισσότερες πληροφορίες και για να δείτε όλα τα ψηφιακά αρχεία του τεκμηρίου*
κοινοποιήστε το τεκμήριο




2011 (EL)

Efficiency optimization of a direct torque controlled induction motor used in hybrid electric vehicles (EN)

Μουσταιζης Σταυρος (EL)
Σεργακη Ελευθερια (EL)
Moustaizis Stavros (EN)
Sergaki Eleftheria (EN)

Πολυτεχνείο Κρήτης (EL)
Technical University of Crete (EN)

The main contribution of this paper is the application of Loss Minimization control algorithm of a three-phase squirrel-cage induction motor which is used in parallel with an internal combustion engine (ICE), in hybrid electric vehicles (HEV). During steady state operation of the electric motor, the electric motor's optimal motor flux profile minimizes the electric motor losses and maximizes the overall HEV efficiency, hybridization factor (HF). During steady state operation of the direct torque controlled (DTC) induction motor, loss minimization is achieved by adjusting the magnitude of the stator flux reference as a function of the vehicle driver (pedal acceleration) and the coordinated control. The proposed stator flux optimization method initially uses a Loss Model Controller (LMC) which provides the real time fast gross approximation of the optimum motor flux and sequential uses a real time fuzzy logic search controller (FLSC). The FLSC control system, provides the real-time refinement of the motor's flux adjustment on the basis of search during the steady states. Due to the FLSC the electric motor's flux level fluctuates in steps until the measurement of electric motor's input electric power settles at a minimum. The dynamic model of the electric motor and the suggested control algorithm designed by using the MATLAB/Fuzzy Logic Toolbox®. The control algorithm is validated by numerical results by using the digital signal processor of eZdspF2812TM. Experimental results will be available upon conclusion of the laboratory testing on a 10 hp, 500 kg HEV in which an 5 hp IM is coupled in parallel with an ICE on the drive shaft of the wheels. (EN)

other
conferenceItem

Hybrid drive vehicles,Hybrid vehicles,hybrid electric vehicles,hybrid drive vehicles,hybrid vehicles (EN)


Αγγλική γλώσσα

2011


Institute of Electrical and Electronics Engineers (EN)




*Η εύρυθμη και αδιάλειπτη λειτουργία των διαδικτυακών διευθύνσεων των συλλογών (ψηφιακό αρχείο, καρτέλα τεκμηρίου στο αποθετήριο) είναι αποκλειστική ευθύνη των αντίστοιχων Φορέων περιεχομένου.