Preparation and characterization of electrophoretically deposited high-temperature superconductor coatings (EN)

Tarantilis, P (EN)

Ochsenkuhn-Petropulu, M (EN)

Psycharis, V (EN)

Moraitakis, E (EN)

Niarchos, D (EN)

Parissakis, G (EN)

The high-temperature superconductor, YBa2Cu3O7-x (x = 0.1-0.2) [YBCO], was prepared using an optimized calcination and sintering process. Thin layers of a few microns of this material were deposited on a silver substrate by applying a simplified electrophoretic deposition technique in a suspension of the fine, < 10 μm, superconductor powder in a non-aqueous liquid. To get a uniform and strongly adherent coating, the deposition process is repeated several times, followed by an appropriate sintering procedure. The initially prepared YBCO powder and the coatings produced were characterized for their superconducting properties by X-ray diffraction analysis (XRD), magnetization measurements with a Superconducting Quantum Interference Device (SQUID) and electrical resistivity measurements. By scanning electron microscopy (SEM) and electron probe microanalysis (EPMA) the grain size of the YBCO film, its thickness and impurity content, respectively, were estimated. © 1994 Springer-Verlag. (EN)

journalArticle (EN)

FILMS (EN)

POWDER DIFFRACTION PATTERNS (EN)

SQUID (EN)

electrophoretic coatings (EN)

high-temperature superconductors (EN)

SEM (EN)

FABRICATION (EN)

XRD (EN)

Chemistry, Analytical (EN)

EPMA (EN)

National Technical University of Athens

Digital Library of National Technical University of Athens | Dspace@NTUA

Κεντρική Βιβλιοθήκη Ε.Μ.Π.

Ιδρυματικό Αποθετήριο

Δημοσιεύσεις μελών Δ.Ε.Π. σε περιοδικά

Mikrochimica Acta (EN)

English

1994 (EN)

http://hdl.handle.net/123456789/11325

10.1007/BF01243133 (EN)

113 (EN)

27 (EN)

1-2 (EN)

19 (EN)

0026-3672 (EN)

ISI:A1994NM12100003 (EN)

Springer-Verlag (EN)