Kinetic-potentiometric assay of formaldehyde in pharmaceutical and industrial samples, monitored by copper solid ion selective electrode, after its reaction with the copper(II)-bis-(ethylenediamine) complex

 
Το τεκμήριο παρέχεται από τον φορέα :

Αποθετήριο :
Ιδρυματικό Αποθετήριο Ολυμπιάς
δείτε την πρωτότυπη σελίδα τεκμηρίου
στον ιστότοπο του αποθετηρίου του φορέα για περισσότερες πληροφορίες και για να δείτε όλα τα ψηφιακά αρχεία του τεκμηρίου*
κοινοποιήστε το τεκμήριο




2007 (EL)

Kinetic-potentiometric assay of formaldehyde in pharmaceutical and industrial samples, monitored by copper solid ion selective electrode, after its reaction with the copper(II)-bis-(ethylenediamine) complex (EN)

Stergiou, D. V. (EN)

Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Χημείας (EL)
Stergiou, D. V. (EN)

A kinetic-potentiometric method is described for the quantitative assay of formaldehyde ( HCHO) in pharmaceutical and industrial preparations. It is based on the reaction of HCHO with ( ethylenediamine)-Cu( II)sulfate [Cu(CH2NH2)(2)(H2O)(2)] center dot SO4. The changes in potential, resulting from the release of the Cu( II) cations, are monitored with a Cu( II)-ion selective electrode. The calibration curve for the HCHO is linear in the concentration range 50 - 250 mg L-1, with a limit of detection of 8.5 mg L-1. The method shows very good reproducibility with an RSD of 2.6% for successive injections (n = 5) of 150 mg L-1 HCHO primary solution, while it is interference free. The method was successfully tested in various industrial and pharmaceutical preparations. (EN)

formaldehyde determination (EN)


Microchimica Acta (EN)

Αγγλική γλώσσα

2007


Springer Verlag (Germany) (EN)




*Η εύρυθμη και αδιάλειπτη λειτουργία των διαδικτυακών διευθύνσεων των συλλογών (ψηφιακό αρχείο, καρτέλα τεκμηρίου στο αποθετήριο) είναι αποκλειστική ευθύνη των αντίστοιχων Φορέων περιεχομένου.