Speciation analysis of Cr-III-Cr-VI using flow injection analysis with fluorimetric detection

Το τεκμήριο παρέχεται από τον φορέα :
Πανεπιστήμιο Ιωαννίνων
Αποθετήριο :
Ιδρυματικό Αποθετήριο Ολυμπιάς
δείτε την πρωτότυπη σελίδα τεκμηρίου
στον ιστότοπο του αποθετηρίου του φορέα για περισσότερες πληροφορίες και για να δείτε όλα τα ψηφιακά αρχεία του τεκμηρίου*
κοινοποιήστε το τεκμήριο

Speciation analysis of Cr-III-Cr-VI using flow injection analysis with fluorimetric detection (EN)

Paleologos, E. K. (EN)

Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Χημείας (EL)
Paleologos, E. K. (EN)

A relatively simple, sensitive, selective, automatic fluorimetric method for the simultaneous determination of chromium(III) and chromium(vr) by flow injection analysis (FIA) was developed, The method is based on the selective oxidation of the non-fluorescing reagent 2-(alpha-pyridyl)thioquinaldinamide (PTQA), which with Cr-VI yields an intensely fluorescent product (lambda(ex) = 360 nm; lambda(em) = 300 nm), Chromium(III) is oxidized on-line to Cr-VI with sodium metaperiodate and the Cr-VI is subsequently treated with PTQA, Fluorescence due to the sum of Cr-III and Cr-VI is measured and Cr-III is determined from the difference in fluorescence values. The effects of various analytical parameters, such as acidity, flow rate, sample volume, temperature, reagent concentration and interfering species, were studied. Kinetic studies using both the stopped-flow technique and the FIA procedure were utilized in order to study and optimise the oxidation conditions for Cr-III On th, basis of its oxidation efficiency. The calibration graphs were rectilinear in the ranges 0.1-10 mu g ml(-1) for Cr-VI and 0.1-1.0 mu g ml(-1) for Cr-III, The method was successfully verified by performing recovery experiments of Cr in several standard reference materials (peach leaves, sediments and tea), and it was applied to the speciation analysis of Cr-III-Cr-VI in environmental waters (mineral, tap and distilled water), a food sample (tomato juice) and synthetic mixtures. Up to 30 samples per hour can be analyzed with a relative standard deviation of about 0.1-2%. (EN)

flow injection (EN)

Πανεπιστήμιο Ιωαννίνων (EL)
University of Ioannina (EN)

Analyst (EN)

Αγγλική γλώσσα


<Go to ISI>://000073658900042

*Η εύρυθμη και αδιάλειπτη λειτουργία των διαδικτυακών διευθύνσεων των συλλογών (ψηφιακό αρχείο, καρτέλα τεκμηρίου στο αποθετήριο) είναι αποκλειστική ευθύνη των αντίστοιχων Φορέων περιεχομένου.