INVERSION OF ELECTRICAL RESISTIVITY TOMOGRAPHY DATA DERIVING FROM 3D STRUCTURES

 
Το τεκμήριο παρέχεται από τον φορέα :

Αποθετήριο :
Δελτίο της Ελληνικής Γεωλογικής Εταιρίας  | ΕΚΤ eJournals
δείτε την πρωτότυπη σελίδα τεκμηρίου
στον ιστότοπο του αποθετηρίου του φορέα για περισσότερες πληροφορίες και για να δείτε όλα τα ψηφιακά αρχεία του τεκμηρίου*
κοινοποιήστε το τεκμήριο



Σημασιολογικός εμπλουτισμός από το EKT
Τμήμα περιοδικού (EL)
Επιστημονικό άρθρο (EL)
2004 (EL)
INVERSION OF ELECTRICAL RESISTIVITY TOMOGRAPHY DATA DERIVING FROM 3D STRUCTURES (EN)
Tsourlos, P.
In this work the effectiveness of 2D and 3D algorithms for inverting Electrical Resistivity Tomography (ERT) data deriving from 3D structures is studied. Further, an analysis of data-collection strategies in the case of 3D structures is being carried out. Dense 2D measurements are nconsidered a practical tool for mapping 3D structures given the current limitations in ERT hardware. To perform the tests 2D and a 3D inversion programs are used. Both schemes use a forward model based on a 2.5D and 3D finite element scheme respectively. For both the 2D and 3D cases a fully non-linear inversion scheme based on a smoothness constrained algorithm is used. The Jacobian matrix is calculated using the adjoined equation technique. Comparisons are being carried out by means of synthetic examples for 3D models and dense 2D measurements with their axis parallel to the X (X-lines) and/or Y (Y lines) directions. For the case of 3D structures and 2D inversion tests results illustrate that both X-line, Y-line measurements are required to delineate the modeling body. However, when 3D inversion is considered either Xline or Y-line measurements are adequate to produce good quality reconstructions of the subsurface. Overall, results clearly illustrate the superiority of 3D over 2D inversion schemes in the case of 3D structures both in view of quality and logistics. Despite the increased computational time required by 3D inversion schemes, good quality results can be produced. Further, 2D inversion techniques require effectively a double amount of measurements to produce acceptable results. The ongoing advancement of fast computers renders the described approach of combining dense 2-D measurement with 3D inversion practical for routine data treatment. (EN)
info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Peer-reviewed Article (EN)
Ελληνική Γεωλογική Εταιρεία
Δελτίο της Ελληνικής Γεωλογικής Εταιρίας
Geophysics
Δελτίο της Ελληνικής Γεωλογικής Εταιρίας
Αγγλική γλώσσα
2004-01-01
https://ejournals.epublishing.ekt.gr/index.php/geosociety/article/view/16472
Geological Society of Greece (EN)
0438-9557
2529-1718
Δελτίο της Ελληνικής Γεωλογικής Εταιρείας; Τόμ. 36 Αρ. 3 (2004): 10o διεθνές Συνέδριο της ΕΓE; 1289-1297 (EL)
Bulletin of the Geological Society of Greece; Vol. 36 No. 3 (2004): 10th International Conference of the Geological Society of Greece; 1289-1297 (EN)
https://creativecommons.org/licenses/by-nc/4.0 (EN)
Copyright (c) 2018 P. Tsourlos (EN)



*Η εύρυθμη και αδιάλειπτη λειτουργία των διαδικτυακών διευθύνσεων των συλλογών (ψηφιακό αρχείο, καρτέλα τεκμηρίου στο αποθετήριο) είναι αποκλειστική ευθύνη των αντίστοιχων Φορέων περιεχομένου.