δείτε την πρωτότυπη σελίδα τεκμηρίου στον ιστότοπο του αποθετηρίου του φορέα για περισσότερες πληροφορίες και για να δείτε όλα τα ψηφιακά αρχεία του τεκμηρίου*
In this work, composite materials, prepared by inclusion of various amounts of BaTiO 3 nanoparticles in PBMA and PHEMA polymer matrices, were characterized in respect to their dielectric properties and then used as the sensing layer of capacitive-type sensors. BaTiO 3 was found to be less effective in enhancing the permittivity of PHEMA, as compared to PBMA, in the range of 1 kHz-1 MHz, possibly due to the observed lower quality of dispersion in the polymer matrix and the higher polarity of the polymer in the former case. The response of the composite-based chemocapacitors to four vapor analytes, covering a wide range of dielectric constants, was studied in relation to the BaTiO 3 load. In all cases, with increasing amount of BaTiO 3 load, the absolute value of capacitance response was increased, due to the corresponding increase of the initial capacitance of the sensing composite layer. However, the corresponding normalized (to the initial capacitance of the sensing composite layer) capacitance values were reduced, due to the decreased volume fraction of the sorbing polymer material in the composite matrix. An exception to this trend, observed upon exposure of the PBMA/BaTiO 3 chemocapacitors to low humidity levels, is also presented and discussed.
(EN)
*Η εύρυθμη και αδιάλειπτη λειτουργία των διαδικτυακών διευθύνσεων των συλλογών (ψηφιακό αρχείο, καρτέλα τεκμηρίου στο αποθετήριο) είναι αποκλειστική ευθύνη των αντίστοιχων Φορέων περιεχομένου.
Βοηθείστε μας να κάνουμε καλύτερο το OpenArchives.gr.
