Laser surface treatment of aluminum alloy 6061 with SiC powder injection. Study of microstructure and wear behavior

 
δείτε την πρωτότυπη σελίδα τεκμηρίου
στον ιστότοπο του αποθετηρίου του φορέα για περισσότερες πληροφορίες και για να δείτε όλα τα ψηφιακά αρχεία του τεκμηρίου*
κοινοποιήστε το τεκμήριο




1994 (EL)

Laser surface treatment of aluminum alloy 6061 with SiC powder injection. Study of microstructure and wear behavior (EN)

Pantellis, D (EN)
Giannetaki, E (EN)
Ponthiaux, P (EN)
Chryssoulakis, Y (EN)

'The microstructure and mechanical properties (hardness and wear resistance) of aluminum Alloy 6061 were studied via laser-induced melting, with SIC particle injection. The upper part of the laser-treated zone was strongly alloyed, showing a fine microstructure with varied morphology and very high microhardness values (500 HV0.03), compared to the substrate (60 HV0.03). In the lower part of this zone, SIC particles remained completely unreacted and had only mechanical adhesion with the matrix. Wear tests revealed that extremely high wear resistance (10 times greater than the untreated substrate surface) resulted from this laser surface treatment technique when a 50-N load was applied. (EN)

journalArticle (EN)

Silicon carbide (EN)
Materials Science, Coatings & Films (EN)
Lasers (EN)
Metallurgy & Metallurgical Engineering (EN)
Surface properties (EN)
Wear of materials (EN)
Molten metals (EN)
Aluminum alloys (EN)
Laser induced melting (EN)
Silicon carbide powder injection (EN)
Microstructure (EN)
Laser surface treatments (EN)


Plating and Surface Finishing (EN)

Αγγλική γλώσσα

1994 (EN)

11 (EN)
56 (EN)
0360-3164 (EN)
81 (EN)
ISI:A1994PQ86000015 (EN)
52 (EN)

American Electroplaters & Surface Finishers Soc Inc, Orlando, FL, United States (EN)




*Η εύρυθμη και αδιάλειπτη λειτουργία των διαδικτυακών διευθύνσεων των συλλογών (ψηφιακό αρχείο, καρτέλα τεκμηρίου στο αποθετήριο) είναι αποκλειστική ευθύνη των αντίστοιχων Φορέων περιεχομένου.