PREPARATION AND CHARACTERIZATION OF CERAMIC BEADS WITH HIERARCHICAL POROSITY FABRICATED BY A PHASE INVERSION TEMPLATING METHOD

Το τεκμήριο παρέχεται από τον φορέα :
Εθνικό και Καποδιστριακό Πανεπιστήμιο Αθηνών   

Αποθετήριο :
Πέργαμος   

δείτε την πρωτότυπη σελίδα τεκμηρίου
στον ιστότοπο του αποθετηρίου του φορέα για περισσότερες πληροφορίες και για να δείτε όλα τα ψηφιακά αρχεία του τεκμηρίου*



PREPARATION AND CHARACTERIZATION OF CERAMIC BEADS WITH HIERARCHICAL POROSITY FABRICATED BY A PHASE INVERSION TEMPLATING METHOD

Vasiliki Chalkia Elena Marathoniti Pavlos Pandis Stella Sklari Vassilis Stathopoulos

scientific_publication_inproceedings
Επιστημονική δημοσίευση - Ανακοίνωση Συνεδρίου (EL)
Scientific publication - Conference Paper (EN)

2016


In this study we report the synthesis and characterization of ceramic beads of hierarchical porosity in the meso and macro pore range. The materials preparation is based on the combination of polymer templating and phase inversion methods. Three different kind of ceramic powders: α-alumina (α-Al2O3), yttria stabilized zirconia (YSZ) and apatite type lanthanum silicate oxide (LFSO) were used for the formation of mm monomodal sized beads. High total porosity values were found (40%-75%) depending on the material sintering properties and the preparation method. The pore size distribution revealed graded pores in the range of large meso and macro pore range depending on the thermal treatment of the materials. (EN)


Θετικές Επιστήμες (EL)
Science (EN)

Αγγλική γλώσσα

University of Ioannina (EN)

Τμήμα Γενικό

https://creativecommons.org/licenses/by-nc/4.0/




*Η εύρυθμη και αδιάλειπτη λειτουργία των διαδικτυακών διευθύνσεων των συλλογών (ψηφιακό αρχείο, καρτέλα τεκμηρίου στο αποθετήριο) είναι αποκλειστική ευθύνη των αντίστοιχων Φορέων περιεχομένου.